Durafilm #300 Glossy
3 MIL GRAPHIC ARTS
Width Length # 300 Glossy
# 300 Matte
# 300 OPP Glossy
3 Mil .0005” Polyester/.0025” Polyethylene
1” Core
This film is good for printed items when low cost is
12” 250’ FP30G-C1-12-250 FP30M-C1-12-250 FO30G-C1-12-250
important. It is recommended for photos and digital images.
18” 250’ FP30G-C1-18-250 FP30M-C1-18-250 FO30G-C1-18-250
25” 250’ FP30G-C1-25-250 FP30M-C1-25-250 FO30G-C1-25-250
27” 250’ FP30G-C1-27-250 FP30M-C1-27-250 FO30G-C1-27-250
Durafilm #300 Matte
3” Core
3 Mil .0005” Polyester/.0025” Polyethylene
12”
250’ FP30G-C3-12-250 FP30M-C3-12-250 FO30G-C3-12-250
12”
500’ FP30G-C3-12-500 FP30M-C3-12-500 FO30G-C3-12-500
This minimal surface reflection film is good for printed items
18”
250’ FP30G-C3-18-250 FP30M-C3-18-250 FO30G-C3-18-250
when low cost is important.
18”
500’ FP30G-C3-18-500 FP30M-C3-18-500 FO30G-C3-18-500
25”
250’ FP30G-C3-25-250 FP30M-C3-25-250 FO30G-C3-25-250
25”
500’ FP30G-C3-25-500 FP30M-C3-25-500 FO30G-C3-25-500
27”
250’ FP30G-C3-27-250 FP30M-C3-27-250 FO30G-C3-27-250
Durafilm #300 OPP Glossy Write-
27”
500’ FP30G-C3-27-500 FP30M-C3-27-500 FO30G-C3-27-500
32”
250’ FP30G-C3-32-250 FP30M-C3-32-250 FO30G-C3-32-250
on/wipe-off
32”
500’ FP30G-C3-32-500 FP30M-C3-32-500 FO30G-C3-32-500
3 Mil .0005” Polypropylene/.0025” Polyethylene
38”
250’ FP30G-C3-38-250 FP30M-C3-38-250 FO30G-C3-38-250
38”
500’ FP30G-C3-38-500 FP30M-C3-38-500 FO30G-C3-38-500
This film is ideally suited for use with dry-erase pens in
42”
250’ FP30G-C3-42-250 FP30M-C3-42-250 FO30G-C3-42-250
applications such as wall charts, teaching aids, point-of-
42”
500’ FP30G-C3-42-500 FP30M-C3-42-500 FO30G-C3-42-500
purchase materials, maps and more.
50”
250’ FP30G-C3-50-250 FP30M-C3-50-250 FO30G-C3-50-250
50”
500’ FP30G-C3-50-500 FP30M-C3-50-500 FO30G-C3-50-500
54”
250’ FP30G-C3-54-250 FP30M-C3-54-250 FO30G-C3-54-250
54”
500’ FP30G-C3-54-500 FP30M-C3-54-500 FO30G-C3-54-500
Durafilm # 14 Glossy
5 Mil .001” Polyester/.004” Polyethylene
A good film when low cost is more important than high
5 MIL GRAPHIC ARTS
clarity. With its thick adhesive, this film can be used to
Width
Length
#14 Glossy
#14 Matte
create an edge seal on thick paper. Results will vary
1” Core
depending on equipment used.
12”
250’
FP14G-C1-12-250
FP14M-C1-12-250
Our Durafilm #23 Low-Melt Glossy or Durafilm #005 Low-
18”
250’
FP14G-C1-18-250
FP14M-C1-18-250
Melt Glossy Liner films are recommended for digital images
25”
250’
FP14G-C1-25-250
FP14M-C1-25-250
and photographic prints.
27”
250’
FP14G-C1-27-250
FP14M-C1-27-250
3” Core
12”
250’
FP14G-C3-12-250
FP14M-C3-12-250
12”
500’
FP14G-C3-12-500
FP14M-C3-12-500
Durafilm #14 Matte
18”
250’
FP14G-C3-18-250
FP14M-C3-18-250
5 Mil .001” Polyester/.004” Polyethylene
18”
500’
FP14G-C3-18-500
FP14M-C3-18-500
25”
250’
FP14G-C3-25-250
FP14M-C3-25-250
A low-reflection film ideal for use when low cost is more
25”
500’
FP14G-C3-25-500
FP14M-C3-25-500
important than high clarity. With its thick adhesive, this film
27”
250’
FP14G-C3-27-250
FP14M-C3-27-250
can be used to create an edge seal on thick paper. Results
27”
500’
FP14G-C3-27-500
FP14M-C3-27-500
will vary depending on equipment used.
32”
250’
FP14G-C3-32-250
FP14M-C3-32-250
32”
500’
FP14G-C3-32-500
FP14M-C3-32-500
Our Durafilm #005 Low-Melt Matte or Durafilm #005 Low-
38”
250’
FP14G-C3-38-250
FP14M-C3-38-250
Melt Satin Liner films are recommended for digital images
38”
500’
FP14G-C3-38-500
FP14M-C3-38-500
and photographic prints.
42”
250’
FP14G-C3-42-250
FP14M-C3-42-250
42”
500’
FP14G-C3-42-500
FP14M-C3-42-500
50”
250’
FP14G-C3-50-250
FP14M-C3-50-250
50”
500’
FP14G-C3-50-500
FP14M-C3-50-500
LaminationCompany.com uses Laminates from Graphics Laminating & other sources.
9